Bernette b05 Crafter handleiding
Handleiding
Je bekijkt pagina 31 van 76
SEWING PREPARATION
31
2024-07 EN 5020105.10A.04
> To continue the winding process, press the foot control.
> Release the foot control to stop the winding process.
> Push the bobbin winding unit to the left into the starting position.
– The machine switches to sewing mode.
> Remove the bobbin and cut the thread.
Threading the Bobbin Thread
NOTICE
Needle Breakage Caused by Unevenly Wound Bobbins
Unevenly wound bobbins can lead to incorrect thread tension or cause needles to break.
> Only use evenly wound bobbins.
Prerequisite:
• The needle is raised.
• The presser foot is raised.
• The machine is switched off.
> To open the bobbin cover, push the handle to the right and remove the bobbin cover.
> Insert a new bobbin so that the thread is wound counterclockwise.
> Press gently on the bobbin.
Bekijk gratis de handleiding van Bernette b05 Crafter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bernette |
| Model | b05 Crafter |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14539 MB |
