Bernette b05 Crafter handleiding
Handleiding
Je bekijkt pagina 24 van 76
SEWING PREPARATION
24
2024-07 EN 5020105.10A.04
Removing and Inserting the Presser Foot Holder
Prerequisite:
• The presser foot sole is removed.
> Raise the presser foot.
> Align the presser foot holder (1) with the presser foot bar (2) underneath and to the left.
> Hold the presser foot holder firmly and screw in the screw by hand.
> Tighten the screw using the screwdriver.
1
2
Attaching the Seam Guide
The seam guide is suitable for sewing parallel lines.
> Insert the seam guide (1) into the hole in the presser foot holder (2).
> Set the required distance to the adjacent seam.
1
2
2
Adjusting the Presser Foot Pressure
> To increase the presser foot pressure, turn the «Presser foot pressure» adjustment knob clockwise.
> To reduce the presser foot pressure, turn the adjusting dial «Presser Foot Pressure» counterclockwise.
Note: Do not reduce the presser foot pressure below «0».
2.8 Threading
Threading Preparation
> Switch the machine off.
> Raise the needle.
> Raise the presser foot.
Bekijk gratis de handleiding van Bernette b05 Crafter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bernette |
| Model | b05 Crafter |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14539 MB |
