Berner Architectural Recessed 16 handleiding
Handleiding
Je bekijkt pagina 11 van 16
-11-
B. To replace the electric heater sub assembly :
1. Disconnect and lockout power to the unit.
2. Remove the bottom access cover.
3. The blower module does NOT need to be removed from the unit to replace an electric heater.
4. Label and detach the connections for supply power and for the auto reset thermal cutouts located on both
inner heaters. See Figure 8.
5. To remove the outer heaters, remove the (3) self drilling screws from the mounting plate that is attached to the
fan. See Figure 11.
6. To remove the inner heaters, remove the (2) self tapping screws from the mounting plate. See Figure 11.
7. Install new heaters. When installing the new outer
heaters, be careful not to strip the holes in the thin gauge steel used on the fan housing.
8. Reconnect supply power and thermal cutout wiring.
See the following pages for information on the Intelliswitch™, including: Quick Start Operation
Guide, and Serial Network Connection
Figure 11
Figure 10
Bekijk gratis de handleiding van Berner Architectural Recessed 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Berner |
| Model | Architectural Recessed 16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4156 MB |
