Berner Architectural Icon 10 handleiding
Handleiding
Je bekijkt pagina 8 van 16

-8-
B. AIR STREAM ADJUSTMENT
1. With the air curtain operating and the door in its full
open position, check to see that nothing is obstructing
the airow at the discharge nozzle vanes.
2. Find the air stream split location. Hold a handkerchief
by its corners, approximately 12” above the oor. Gently
move the handkerchief back and forth in the doorway.
Make sure the air is being directed to both the inside
and the outside. See Figure 9. The split location is
indicated where the handkerchief is vertical with
minimal or no uttering.
3. The split location should be approximately 3” outside
the doorway. If necessary adjust the discharge nozzle
vanes by de-energizing the unit and rmly pushing/
pulling on the vane tip until properly located.
Figure 9 - Air Stream Adjustment
20°
AIR
Discharge
Nozzle
A
I
R
A
I
R
INTERIOR
EXTERIOR
6' minimum
3"
Handkerchief
12"
AIR
Airstream
Bekijk gratis de handleiding van Berner Architectural Icon 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Berner |
Model | Architectural Icon 10 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 3492 MB |