Berner Architectural Icon 10 handleiding
Handleiding
Je bekijkt pagina 15 van 16
-15-
XI. APPENDIX
D. PureAir Package™
Air purication system for the space inside the door.
• All Architectural Icon 10 air curtains that are equipped
with the PureAir Package™ include EC motor(s), facto-
ry-installed ionization device(s) and MERV 8 washable
lter(s), and the “PURE” setting in the menu settings of
the Intelliswitch.
• When the air curtain is operating, so is the air purica-
tion system.
PURE mode operation:
The unit(s) are shipped with the "PURE" mode already selected.
1. When the door opens: The air curtain and, if applicable,
the heater(s) activate and run at set speed
2. When the door closes:
for heated models: The PURE mode allows for the air
curtain to operate rst in the Comfort Plus mode and
then, once the thermostat is satised, to power down
to speed setting 1, which in PURE mode, is set to the
very low speed of 700 rpm.
for unheated models: Once the time delay expires, the
unit powers down to speed setting 1.
A. Interconnect Connection (a.k.a. daisy chain)
via physical connection
Used for programming multiple air curtains from a single
Intelliswitch™ digital controller.
NOTE: The air curtain must have been ordered from the factory
with the Interconnect physical data link option.
A wired ethernet connection (provided by others) must be
made between all air curtains to be linked. Once air curtains
are linked, all menu settings made through any air curtain
Intelliswitch display or remote Intelliswitch display will transfer
to all other linked air curtains. Parameter changes made on any
linked air curtain will update all other Intelliswitch boards “live”
upon menu selections.
NOTE: Low voltage ethernet cable (provided by others),
maximum length, 300’.
B. Remote Mounted Touchscreen Display or Tablet
1. Touchscreen Display: If the unit was ordered with a
remote mounted Intelliswitch touchscreen display,
the air curtain will come pre-wired with a USB-C
connection in the wiring compartment and 20’ of
USB-C Cable to link and power the device.
2. Tablet: If the unit was ordered with a remote mounted
tablet, the air curtain will come pre-wired with a
power-over-ethernet (PoE) connection in the wiring
compartment to power the devices. Connect a CAT 5
ethernet cable for low voltage power with a maximum
length of 300' (provided by others).
C. Building Management System (BMS) Integration
(BACnet or Modbus)
This unit is equipped with the Berner AIR™ BMS smart control &
app, and is BACnet and Modbus compatible.
1. To connect wirelessly to the Building Management
System using BACnet-IP, BACnet-MS/TP, Modbus-TCP,
or Modbus-RTU client, download the Berner AIR App,
pair the air curtain to the app and then in the settings
menu select the BACnet or Modbus option. Follow the
prompts to congure.
2. To connect via wire: this air curtain includes an
ethernet connection port in the wiring compartment
to connect to the Building Management System (BMS)
via BACnet-IP or Modbus protocols. Connect using a
CAT 5 ethernet cable (provided by others).
Once wired, either:
a. Download the Berner AIR™ App, pair the air curtain
to the app and then in the settings menu select the
BACnet or Modbus option. Follow the prompts to
congure. Once congured to the BMS, the app can
be disconnected.
b. Tap the Intelliswitch touchscreen on the air curtain,
and then tap on to access the advanced
parameters.
Bekijk gratis de handleiding van Berner Architectural Icon 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Berner |
| Model | Architectural Icon 10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3492 MB |
