Berger & Schröter PET1680 handleiding
Handleiding
Je bekijkt pagina 18 van 60
18
6. Ensure that no power, water or heating lines are laid at the planned
drilling location.
7. The plugs supplied are only suitable for installation on concrete and
stone. Before starting the installation, please check the installation
site carefully to ensure that it is suitable for the wall plugs. If in doubt,
consult a specialist.
Installation
This product can be hung on the wall or placed directly on the oor/
table etc. The food tray is removable. You can also use the appliance
without the food tray.
Note: The product must be placed as close as possible to the rou-
ter, preferably at a distance of 3 metres. The device and the rou-
ter should not be placed directly against the wall, as this may result
in a weak communication signal between the router and the device.
device. If this is the case, the feeding station will repeatedly play the
sound „Please connect network“.
Installation without feeding tray
Use the oval stickers supplied for this purpose. Remove the pro-
tective paper and stick the stickers onto the notches provi-
ded on the underside of the feeding station. Now remove the
transparent protective lm and set the feeding station down.
Tip: If the stickers are dirty after prolonged use, you can clean them.
The stickiness remains unchanged.
Bekijk gratis de handleiding van Berger & Schröter PET1680, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Berger & Schröter |
| Model | PET1680 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5543 MB |