Berbel Smartline BKH 80 ST GM P handleiding

Afzuigkap

Berbel

112 pagina's

PDF beschikbaar

Handleiding

109

Maintenance

6003417_a – 26.09.2017

6.2.2 Changing the lamps

The device is fitted with maintenance-free LED lighting.

In the event of a fault:

☞ Please consult your dealer or customer services.

6.3 Fault rectification

Possible faults are described below:

Description of the fault.

y Possible cause.

☞ Remedy.

Fan and lighting do not work.

y No power supply.

☞ Check that the all-pole mains switch is connected.

☞ Switch the mains switch on.

y The breaker may have been tripped or is defective.

☞ Check to see if the breaker has tripped.

☞ If you use electric circuit breakers, turn the circuit

breaker on again.

☞ For other types of fuse, consult a qualified electrician.

The fan does not work.

y The device is not switched on.

☞ Check all power levels.

D “4.3 Normal operation” (page 104).

y The device is connected to a window contact switch and

the window is closed.

☞ Open the window.

y The device is connected to an under-pressure monitor.

The under-pressure monitor detects a critical under-

pressure.

☞ Open a window.

☞ Wait until the air pressure returns to normal.

The lighting does not work.

y The lamp has blown.

☞ Please consult your dealer or customer services.

Smells occur during operation.

y The filter filling is used up.

☞ Change the filter filling.

D “6.2.1 Replacing filter filling” (page 108).

Poor device performance.

y The recirculated air filter is clogged.

☞ Replace the filter filling of the recirculated air filter.

D “6.2.1 Replacing filter filling” (page 108).

Control panel does not react after being touched several times.

y The control panel is soiled.

☞ Clean the control panel.

D “5. Cleaning” (page 106).

y The device software requires a restart.

☞ Briefly disconnect the mains power supply.

Moisture in the device.

y Dripping or splashing water has penetrated the device.

y Liquid (e.g. from vases, bottles on the device) has

penetrated the device.

☞ Immediately shut off the power supply, by removing

the fuse.

☞ Make sure that the power supply cannot be

unintentionally reconnected. For example by tasking

a person with ensuring that the fuse/breaker is not

restored/switched on.

☞ Ensure that no more liquid can penetrate the device.

☞ Allow the device to dry.

☞ Have the device checked and repaired by qualified,

specialist personnel prior to using the device again.

If a fault persists:

☞ Please consult your dealer or customer services.

Bekijk gratis de handleiding van Berbel Smartline BKH 80 ST GM P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.