Berbel Smartline BKH 80 ST GM P handleiding

Afzuigkap

Berbel

112 pagina's

PDF beschikbaar

Handleiding

105

Operation

6003417_a – 26.09.2017

The active power setting is displayed by the LEDs illuminated

beneath the buttons:

y 1 LED lights up = Power setting 1

y 2 LEDs light up = Power setting 2

y 3 LEDs light up = Power setting 3

To achieve an optimal efficiency in removing cooking fumes:

☞ Turn the device on 1-2 minutes before you start cooking.

This allows the flow of air to build up, and the fumes are

removed at an early stage.

☞ In order to collect the cooking fumes effectively, use the

rear hob plates for intensive cooking.

☞ During the cooking process, switch to a power level that

is appropriate for the intensity of the cooking vapours:

y Power level 1 - lowest fan power

y Power level 2 - medium fan power

y Power level 3 - high fan power

☞ If the intensity of the cooking vapours does not subside,

switch to a higher power level.

☞ Switch to power setting 3 if frying.

☞ Turn on the run-on function when you have finished

cooking.

D “4.3.1 Run-on function” (page 105).

☞ Check the fresh air supply at regular intervals.

☞ Use the device also to reduce other unpleasant smells.

Such as from:

y Onions and garlic

y Oven, microwave and steamer

y Fondue and raclette

D WARNING

Fire hazard due to grease residue!

In operation grease residue, which is highly inflammable,

collects in and on the device.

☞ Clean the device properly.

D “5. Cleaning” (page 106).

If you switch the machine on and hear an unusually loud fan

noise:

☞ Clean the device.

☞ Observe the stipulations for cleaning.

D “5. Cleaning” (page 106).

If you switch the machine on and notice a smell:

☞ Change the filter filling.

☞ Observe the stipulations for changing the filter filling.

D “6.2.1 Replacing filter filling” (page 108).

After 6 hours without operation, the device (including

lighting) automatically switches off.

4.3.1 Run-on function

The device comes with a run-on function. If this function is

used, the device will work for a further 10 minutes at power

setting 2.

In recirculated air mode, it is necessary to use the run-on

function so that the device can remove the remaining

odours. Using the run-on function increases the life of the

filter filling. The filter filling must be replaced at regular

intervals.

Button Function

The device is turned off.

☞ Press button 1x.

The device switches on the run-on function

with power setting 2.

The run-on function is switched on.

☞ Press button 1x.

The run-on time starts again (10 minutes).

When the power stage changes, the run-on

function is ended.

During the run-on time (10 minutes), the LEDs

for power settings 1 and 2 will flash.

4.3.2 Hob lighting

The hob lighting is fitted with energy-saving LED lighting.

The lighting can be used at any time and independently of

the fan.

Button Function

☞ Press button 1x, in order to switch the hob

lighting on or off.

Bekijk gratis de handleiding van Berbel Smartline BKH 80 ST GM P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.