Berbel Ergoline 2 BKH 110 EG-2 Handleiding (132 Pagina's)

Handleiding

122

Operation

6006910_0 – 18.11.2023

4.2.2 Filter filling indicator

The device has a control indicator to remind the operator

to change the filter filling. If no air circulation filter is used,

the control indicator has no meaning.

The function is set so that the button flashes every 1,000 fan

operating hours (flash duration 120 seconds) as soon as

the device is turned off. The hours counter is restarted by

switching off the control indicator.

Button Function

Button flashes:

The filter filling must be replaced.

, “6.2.2 Replacing filter filling” (page 126).

1 Hold the button (> 1 second) to restart the

hours counter.

4.2.3 Cooktop lighting

The cooktop lighting is equipped with energy-saving LEDs.

The lighting can be used independently of the fan. It can be

switched on when the device is on.

It can be switched off at any time.

Button Function

1 Press the button once to switch the

cooktop lighting on or off.

4.2.4 Run-on function

The device comes with a run-on function. When the function

is used, the device continues to work 10 minutes after being

switched off.

In recirculated air mode, it is necessary to use the run-on

function so that the device can remove the remaining

odours. Using the run-on function increases the life of the

filter filling. The filter filling must be replaced at regular

intervals.

The run-on function can be switched on manually or

automatically. The device is delivered with the automatic run-

on function active, and settings are made in configuration

mode.

, “4.3 Configuring the device” (page 123).

Button Function

The device is switched on.

If the automatic run-on function is activated:

1 Touch the button one time.

2 The device switches off.

2 The run-on time (10 minutes) starts

automatically in power level 1.

2 The button for power level 1 goes on.

2 The run-on function button flashes.

2 It is possible to switch between the power

levels.

If the button is touched again, the device

shuts off completely.

The device is switched on, and any power

level is selected.

1 Touch the button one time.

2 The run-on time (10 minutes) starts in the

selected power level.

2 The button for the active power level lights

up.

2 The run-on function button flashes.

2 It is possible to switch between the power

levels.

If the button is touched again, the run-on

function stops.

Bekijk gratis de handleiding van Berbel Ergoline 2 BKH 110 EG-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.