Handleiding
Je bekijkt pagina 22 van 32
22
Operation
6005077_a – 24.02.2020
4.3 Configuring the device
Button Function
The device is turned on.
☞ Touch and hold 1x button for longer than
5 seconds until the configuration steps are
complete.
All buttons flash.
The device switches to configuration mode.
The configuration mode is turned on.
To exit the configuration mode:
☞ Release the button.
The settings are now saved.
The device is in normal mode again.
In configuration mode, the following functions can be set
by touching the corresponding button.
Button Function
AutoRun.
As delivered, the function is turned on.
☞ Touch the button one time.
Button glows brightly:
The AutoRun automation is activated.
☞ Touch the button one time.
Button flashes:
The AutoRun automation is deactivated.
Extraction mode / recirculated air mode
changeover.
As delivered, the function is turned off.
☞ Touch the button one time.
Button glows brightly:
The changeover function is activated.
☞ Touch the button one time.
Button glows dimly:
The changeover function is deactivated.
Reset hours counter
The control indicator for changing the filter
filling blinks every 1000 fan operating hours.
A reset can be used to reset the hours counter
to zero.
☞ Hold the button (> 1 second).
The counter restarts.
The buttons 1, 2, 3 and P flash quickly,
configuration mode is exited.
Button Function
Automatic run-on.
As delivered, the function is turned on.
☞ Touch the button one time.
Button glows brightly:
Automatic run-on is activated.
☞ Touch the button one time.
Button flashes:
Automatic run-on is deactivated.
Bekijk gratis de handleiding van Berbel Blockline BWH 120 BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Berbel |
| Model | Blockline BWH 120 BL |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 4550 MB |
