Handleiding
Je bekijkt pagina 74 van 74
74
KVM Switch
USB-C™ connection (models with USB-C™ ports)
Need more help?
If your problems remain after checking this manual, please contact your place of purchase
or visit the local website from Support.BenQ.com for more support and local customer
service.
No response after switching to a KVM source.
Check the cable connections and menu settings in the following order.
• Make sure the cables are properly connected and the KVM Switch function is
enabled. See Establishing KVM connections on page 47 for more information.
• The monitor remembers the KVM pairing setting before it was turned off and may not
recognize the new cable connections immediately if changed. You can check if the
correct input source has been selected for the KVM source from KVM Switch > USB,
depending on the KVM source you are switching to.
• If you don’t have a hot key for KVM Switch and the computer of the KVM source you
are switching to is in Sleep mode, switch the input to the sleeping computer, and
re-connect your keyboard or mouse manually to the sleeping computer to wake it up.
(Windows only) If it does not work, try to press the power button to wake the
computer up.
The input was switched to the other source. However, there is no image or cursor
displayed.
• If you go for Scenario A: Working with two computers and one monitor, check if None
has been selected from KVM Switch > USB. If so, the screen does not display
anything from the second source as there is none. You cannot control the current
display either as the keyboard and mouse control has been switched away. In this
case, select a video input manually from Display > Signal Input.
• If you are using KVM and MST at the same time as described in Scenario C: Working
with KVM and MST at the same time on page 50, make sure the video sources to the
first monitor are USB-C™ and DP. If the cables are properly connected, go to KVM
Switch > USB and make sure it is set to DisplayPort.
No video or audio output from the laptop with USB-C™ connection.
Check the cable connections and menu settings in the following order.
• Check if the USB-C™ cable has been connected to the monitor and the laptop
properly. See Connect the PC video cable. on page 29 for more information.
• Check if the input source has been selected to USB-C on Display > Signal Input.
Bekijk gratis de handleiding van BenQ PD2730S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BenQ |
| Model | PD2730S |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6587 MB |
