Handleiding
Je bekijkt pagina 11 van 74
11
Care and cleaning
• Do not place the monitor face down on the floor or a desk surface directly. Otherwise,
scratches on the panel surface may occur.
• The equipment is to be secured to the building structure before operation.
• (For models that support wall or ceiling mounting)
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are
stable enough to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
• Always unplug the product from the power outlet before cleaning. To clean the monitor,
see Cleaning the LCD screen on page 13 for more information.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
sources, or in a built-in installation unless proper ventilation is provided.
• Do not place heavy loads on the monitor to avoid possible personal injury or damage to
the monitor.
• Consider keeping the box and packaging in storage for use in the future when you may
need to transport the monitor.
• Refer to the product label for information on model name, power rating, manufacturing
date, barcode, serial number, and identification markings. The locations of labels vary by
model. See the illustration below for where the labels can be.
Servicing
• Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltages or other risks. If any of the above mentioned misuse or
other accident such as dropping or mishandling occurs, contact qualified service
personnel for servicing.
• Contact your place of purchase or visit the local website from Support.BenQ.com for more
support.
General warranty information
Note that the monitor warranty may be void if any of the following conditions occurs:
• Documents required for warranty services have been altered by unauthorized use or is
illegible.
• The model number or production number on the product has been altered, deleted,
removed or made illegible.
Possible label location:
Bottom front bezel
Inside the VESA cover
Lower part of the rear cover
Bekijk gratis de handleiding van BenQ PD2730S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BenQ |
| Model | PD2730S |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6587 MB |
