Handleiding
Je bekijkt pagina 12 van 41
9
EN
Install Instruction
Door handle Install (optional)
Note: Figures in the user manual are only
for reference. The actual product may differ
slightly.
The refrigerator must be disconnected
from the source of electrical supply before
attempting the installation of accessory.
Step 1: Take out two plug pins from the door
(Side of door open)
Step 2: Install the door handle to the door
and fasten it with screws
Step 3: Cover screw caps of the handle into
screw holes
ATTENTION
Dierences: Due to technical changes and
dierent models, some of the illustrations in this
manual may dier from your model.
Tips for energy saving
Do not place the appliance near cookers,
radiators or other heat sources. If the
ambient temperature is high, the compressor
will run more frequently and for longer,
resulting in increased energy consumption.
Ensure that there is sufficient ventilation at
the base of the appliance, on the sides of the
appliance and at the back of the appliance.
Please also observe the spacing dimensions
in the chapter “Installation”.
The arrangement of drawers, shelves and
trays as shown in the product overview
offers the most efficient use of energy and
should be retained as far as possible.
To obtain a larger storage space (e.g. for
large refrigerated/frozen goods), the middle
drawers and shelves can be removed. The
top and bottom drawers and shelves should
be removed last if necessary.
An evenly filled refrigerator/freezer
compartment contributes to optimal energy
use.
Allow warm food to cool before placing it in
the refrigerator/freezer compartment. Food
that has already cooled down increases
energy efficiency.
Allow frozen food to defrost in the
refrigeration compartment The coldness
of the frozen food reduces the energy
consumption in the refrigerator
compartment and thus increases the energy
efficiency.
Open the door only as briefly as necessary
to minimise cold loss. Opening the door
briefly and closing it properly reduces
energy consumption.
Setting the temperature no colder than
necessary contributes to optimal energy use.
The door gaskets of your appliance must
be perfectly intact so that the doors close
properly and energy consumption is not
increased unnecessarily.
Bekijk gratis de handleiding van Benavent F2PBMS14455, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Benavent |
| Model | F2PBMS14455 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4593 MB |
