Handleiding
Je bekijkt pagina 6 van 32
4
INSTALLATION
• This appliance is NOT intended for use in commercial environments.
• Please observe the installation instructions provided and note that this
appliance should only be installed by a qualied technician. Incomplete or
improper installation could lead to safety issues and make your warranty void.
• The tter is liable for any damage resulting from incorrect installation.
• This appliance is only intended to be fully tted in a kitchen.
• This appliance is not designed to be used as a tabletop appliance or inside a
cupboard.
• The tted cabinet must not have a back wall behind the appliance. A gap of at
least 45mm must be maintained between the wall and the base/back panel of
the unit. There must also be a ventilation opening of 250cm
2
on the front of the
tted cabinet - to achieve this, cut back the base panel or t a ventilation grille.
• Ventilation slots and intakes must not be covered.
• The unit into which the appliance is tted must be heat-resistant up to 90°C.
• Do not hold or carry the appliance by the door handle. The door handle cannot
hold the weight of the appliance and may break off.
Note: There should be gap above the oven.
min 45
Cupboard feet
Ventilation grid
min 45
50
460
250
®
Bekijk gratis de handleiding van Belling BD45CSBK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Belling |
| Model | BD45CSBK |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2353 MB |