BEKO WMY 81283 LB2 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Afdrukken

Je bekijkt pagina 36 van 60

36 / EN

Washing Machine / User’s Manual

4.1 Installation

• Applytothenearestauthorisedserviceagentfortheinstallationofyourproduct.

• Preparationofthelocationandelectrical,tapwaterandwastewaterinstallationsattheplaceof

installation is under customer's responsibility.

• Makesurethatthewaterinletanddischargehosesaswellasthepowercablearenotfolded,

pinched or crushed while pushing the product into its place after installation or cleaning

procedures.

• Makesurethattheinstallationandelectricalconnectionsoftheproductareperformedby

authorised service. Manufacturer shall not be held liable for damages that may arise from

procedures carried out by unauthorised persons.

• Priortoinstallation,visuallycheckiftheproducthasanydefectsonit.Ifso,donothaveitinstalled.

Damaged products cause risks for your safety.

4.1.1 Approprate nstallaton locaton

• Placetheproductonahardandlevelfloor.Donotputitontoacarpetwithhighpileorother

similar surfaces.

• Whenthewashingmachineanddryerareplacedontopofeachother,theirtotalweight–when

loaded–amountsto180kilograms.Placetheproductonasolidandflatfloorthathassufficient

load carrying capacity!

• Donotplacetheproductonthepowercable.

• Donotinstalltheproductintheenvironmentswherethetemperaturefallsbelow0ºC.

• Leavingagapatthesidesofthemachineissuggestedtoreducevibrationandnoise

• Onagraduatedfloor,donotplacetheproductnexttotheedgeoronaplatform.

• DonotplaceheatsourcessuchasHobs,Irons,Ovens,etc.onthewashingmachineanddonotuse

them on the product.

4.1.2 Removng packagng renforcement

Tilt the machine backwards to remove the packaging

reinforcement. Remove the packaging reinforcement by pulling the

ribbon. Do not make this operation alone by yourself.

4.1.3 Removng the transportaton locks

1 Loosen all bolts with an appropriate wrench until they turn freely.

2 Remove the transport safety bolts by turning them slightly.

3 Insert the plastic covers in the bag containing the user manual to the openings on the rear

panel.

A

CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the

product will be damaged.

C

Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again

in the future.

Install the transport safety bolts in reverse order of the disassembly procedure.

Never move the product without the transportation safety bolts properly fixed in place!

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Bekijk gratis de handleiding van BEKO WMY 81283 LB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van BEKO (Niet gecategoriseerd)

Handleiding bekijken

BEKO CO 8460

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO CFM4340W

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO BCNE400E50SHN1

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO B5WFT8124853M

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO BCSE400E40SN1

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO FBSHT62111GX

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO FBGT62110DXO

Niet gecategoriseerd - handleiding

Handleiding bekijken

BEKO FSGT52110DXON

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd