BEKO WDR854P14N1W handleiding
Handleiding
Je bekijkt pagina 64 van 76
64 / EN
Washer-Dryer
7 Troubleshooting
Programmes do not start after the loading door is closed.
• Start / Pause / Cancel button is not pressed.>>> *Press Start/Pause/Cancel button.
• It may be difficult to close the loading door in case of excessive loading.>>>
*Reduce the amount of laundry and make sure that the loading door is closed properly.
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem
(line voltage, water pressure, etc. >>> Press and hold On/Off button for 3 seconds to
reset the machine to factory settings. (See. “Cancelling the programme”)
Water in the machine.
• Some water may remain in the product due to the quality control processes in the
production. >>> This is not a failure; water is not harmful to the machine.
There is water leaking from the bottom of the machine.
• There is a problem with hoses or the pump filter. >>> Be sure the seals of the water
inlet hoses are securely fitted. Attach the hose to the tap tightly.
• Pump filter is not closed securely. >>> Make sure that the pump filter is closed
securely.
Machine does not fill with water.
• Tap is turned off. >>> Turn on the taps.
• Water inlet hose is bent. >>> Flatten the hose.
• Water inlet filter is clogged. >>> Clean the filter.
• Loading door is not closed. >>> Close the loading door.
Machine does not drain water.
• Water drain hose is clogged or twisted. >>> Clean or flatten the hose.
• Pump filter is clogged. >>> Clean the pump filter.
Machine vibrates or makes noise.
• Machine is standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance has entered into the pump filter. >>> Clean the pump filter.
• Transit bolts are not removed. >>> Remove the transit bolts.
• Laundry quantity in the machine is too little. >>> Add more laundry to the machine.
• Machine is overloaded with laundry. >>> Take out some of the laundry from the
machine or distribute the load by hand to balance it.
• Machine is in contact with a rigid surface. >>> Make sure that the machine is not
contacting anything.
Machine stopped shortly after the programme started.
• Machine has stopped temporarily due to low voltage. >>> It will resume running
when the voltage restores to the normal level.
Machine directly discharges the water it takes in.
• Draining hose is not at adequate height. >>> Connect the water draining hose as
described in the user manual.
Bekijk gratis de handleiding van BEKO WDR854P14N1W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | WDR854P14N1W |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6759 MB |
