BEKO WCV10614XB0STW handleiding
Handleiding
Je bekijkt pagina 6 van 24
6 / EN
Washing Machine / User’s Manual
4.1 Installation
• Applytothenearestauthorisedservice
agent for the installation of your product.
• Preparationofthelocationandelectrical,
tap water and waste water installations at
the place of installation is under customer's
responsibility.
• Makesurethatthewaterinletanddischarge
hoses as well as the power cable are not
folded, pinched or crushed while pushing
the product into its place after installation or
cleaning procedures.
• Makesurethattheinstallationandelectrical
connections of the product are performed
byauthorisedservice.Manufacturershall
not be held liable for damages that may
arise from procedures carried out by
unauthorised persons.
• Priortoinstallation,visuallycheckifthe
product has any defects on it. If so, do not
have it installed. Damaged products cause
risks for your safety.
4.1.1 Appropriate installation location
• Placetheproductonahardandlevelfloor.
Do not put it onto a carpet with high pile or
other similar surfaces.
• Whenthewashingmachineanddryerare
placed on top of each other, their total
weight –when loaded– amounts to 180 kg.
Place the product on a solid and flat floor
that has sufficient load carrying capacity!
• Donotplacetheproductonthepowercable.
• Donotinstalltheproductinthe
environments where the temperature falls
below 0 ºC.
• Leavingagapatthesidesofthemachineis
suggested to reduce vibration and noise
• Onagraduatedfloor,donotplacethe
product next to the edge or on a platform.
• DonotplaceheatsourcessuchasHobs,
Irons, Ovens, etc. on the washing machine
and do not use them on the product.
4.1.2 Removing packaging reinforcement
Tilt the machine
backwards to remove the
packaging reinforcement.
Remove the packaging
reinforcement by pulling
the ribbon. Do not make
this operation alone by
yourself.
4.1.3 Removing the
transportation locks
1 Loosenallboltswithanappropriatewrench
until they turn freely.
2 Remove the transport safety bolts by
turning them slightly.
3 Insert the plastic covers in the bag
containing the user manual to the openings
on the rear panel.
A
CAUTION!
• Remove the transportation safety bolts
before operating the washing machine!
Otherwise, the product will be damaged.
C
INFORMATION
• Keep the transportation safety
bolts in a safe place to reuse when
the washing machine needs to
be moved again in the future.
• Install the transport safety bolts in reverse
order of the disassembly procedure.
• Never move the product without
the transportation safety bolts
properly fixed in place!
4.1.4 Connecting water supply
C
INFORMATION
• The water supply pressure required to
run the product is between 1 to 10 bars
(0.1–1MPa).Itisnecessarytohave
10 – 80 liters of water flowing from the
fully open tap in one minute to have your
machine run smoothly. Attach a pressure
reducing valve if water pressure is higher.
A
CAUTION!
• Modelswithasinglewaterinletshould
not be connected to the hot water
tap. In such a case the laundry will get
damaged or the product will switch to
protection mode and will not operate.
• Do not use old or used water inlet
hoses on the new product. It may
cause stains on your laundry.
Bekijk gratis de handleiding van BEKO WCV10614XB0STW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | WCV10614XB0STW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3226 MB |
