Handleiding
Je bekijkt pagina 19 van 64
EN / 19
wide surface cooking zone. Thus, you
can utilize a wider cooking zone just
with the same values.
1. Touch the wide surface cooking zone
selection key while one or both of the
left cooking zones is/are running.
ð The smaller one of the temperat-
ure values of the cooking zones
you have previously selected will
appear on the rear left cooking
zone display. If there is a timer dur-
ation given, the timer value of the
cooking zone with the lower value
will appear on the display.
2. To change the temperature value after-
wards, set the desired temperature on
the setting area of both cooking zones.
If you touch the wide surface zone
key while the wide surface cooking
zone is active, the cooking zones
will be separated and turn off.
Turning off the wide surface cooking zone
ü Wide surface cooking zone can be
turned off in 3 different ways:
1. By dropping the temperature to "0"
level: You can turn the wide surface
cooking zone off by dropping the tem-
perature level to "0".
2. By using the turn-off with the timer op-
tion for the wide surface cooking zone:
When the time is over, the timer will turn
off the wide surface cooking zone. 0 will
appear on the left cooking zone display
and 00 will appear on the timer display.
The light of " " key on the rear left
cooking zone display will go off.
3. By touching the wide surface cooking
zone symbol for 3 seconds: If you touch
the wide surface cooking zone symbol
for 3 seconds, the cooking zone is
turned off.
"Autoflexi" mode (Enabling the automatic
wide surface cooking zone)
If the pot is placed on cooking zones as
shown below, "flexi" (wide surface cooking
zone) mode will be automatically enabled.
Touch " " once to exit this mode.
High power setting (BOOSTER)
You can use booster function to perform
heating at the maximum power. However,
this function is not recommended for cook-
ing a long time. Booster function may not
be available in all cooking zones. When the
booster setting time (see, Table of opera-
tion time limits) is over, cooking zone will
switch off.
Selecting BOOSTER directly:
1. Touch the " " key to turn on the hob.
2. Touch the " " key.
ð The cooking zone that has been activ-
ated will run with maximum power and
the animated booster symbol " " will
appear on the cooking zone display.
When the booster setting time (see,
Table of operation time limits) is over,
cooking zone will switch off.
Selecting the booster while the cooking
zone is operating:
1. While the hob is on and the respective
cooking zone is active, touch " ".
EN
IT
Bekijk gratis de handleiding van BEKO MHII 98810 NTMT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | MHII 98810 NTMT |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5617 MB |
