BEKO HTV 8743 XG handleiding
Handleiding
Je bekijkt pagina 61 van 72
User’s Manual
61 / EN
Maintenance and cleaning
6.5 Draining remaining water and cleaning the pump filter
The filter system in your machine prevents solid items such as buttons, coins and
fabric fibres clogging the pump impeller during discharge of washing water. Thus,
the water will be drained without any problem and the service life of the pump will
extend.
If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned
whenever it is clogged or in every 3 months. Water must be drained off first to clean
the pump filter.
In addition, prior to transporting the machine (e.g., when moving to another house)
and in case of freezing of the water, water may have to be drained completely.
A
CAUTION
• Foreign substances left in the pump filter may damage
your product or may cause noise problem.
• If the product is not being used, shut the tap, remove
mains hose and drain the water inside the machine in
places where there is the risk of the product freezing .
• After each use, turn off the water tap to which the
mains hose is connected.
1. In order to clean the dirty filter and discharge the water, unplug the machine to cut
off the supply power.
A
CAUTION
• Temperature of the water inside the machine may
rise up to 90 ºC. To avoid the risk of burning, clean
the filter after the water inside the machine is cooled
down.
2. Open the filter cover.
Bekijk gratis de handleiding van BEKO HTV 8743 XG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | HTV 8743 XG |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6358 MB |
