Handleiding
Je bekijkt pagina 11 van 96
11 / EN
Hood / User Manual
Disconnect the hood from the mains-
supply. This appliance is equipped with
3 W spot LED lamps.
• Remove the suction gril to access the
lamp area.
• Replace the damaged lamp.
Bulb
BulbPower 3 W
Holder / Socket E14
Bulb Voltage 230 V
Size D35x98 mm
ILCOS Code DRGSB/C/UB-3/27/1B-
230-E14-55
Luminous flux 320 lm
Correlated colour
temperature
2700 K
This product contains a light source of
energy ef- ficiency class “E”.
3.5Operationwithchimney
connection
• Vapour is extracted
through the flue duct,
which is fastened to the
connection head on the
hood.
• The diameter of the flue duct must
be the same as the connection ring.
In horizontal settings, the pipe has to
have a slight upward slope (around
10º) so that the air can exit the room
easily.
3 Using the appliance
3.6Operationwithoutchimney
connection
• Air is filtered through the
carbon filter and recircu-
lated in the room. Carbon
filter is used when it is
impossible to use a flue
in the house.
• In flue less use, remove the flaps inside
the flue adapter.
• Remove the aluminium grease filter.
To install the carbon filter, fit the filter
to the tabs by centring it on the plas-
tic piece on both sides of the fan body.
Tighten it by turning right or left.
• Replace aluminium grease filter.
Bekijk gratis de handleiding van BEKO HNU51310BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | HNU51310BE |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 9175 MB |
