BEKO HNT62610BH handleiding
Handleiding
Je bekijkt pagina 13 van 64
Cooker Hood / User Manual
13 / EN
507
2
219
Prepare the cabinet in the specified dimensions.
A
B
C
D
(Figure 2)
By using the 4 x 40 screws provided with the hood,
install the appliance to the cabinet from the points
A, B, C and D. When the slider set moves, the front
panel shall not rub on the cabinet door (Figure 2)
(Figure 3)
Install flexible aluminium pipe to plastic flue outlet.
Install the other end of the pipe to the flue hole on
the wall (Figure 3).
5
Installation of appliance
5.3 Installation of the hood
A
CAUTION: Use protective gloves
and goggles for drilling and cutting
operations.
• Paste the installing template provided with the
hood on the surface where the hood is to be
mounted.
• Make holes with Ø4 mm diameter on the points
marked as A, B, C, D on the installation template.
• Drill the flue outlet hole specified in the installing
template in the sizes given.
• Remove the appliance from its packaging. Install
the plastic flue flaps provided in the accessories
to the air outlet flue of the appliance as shown
below.
(Figure 1)
1. Flap Pin Socket
2. Flap Pin
Insert the plastic pin (Figure 11/area no. 2) on the
pin socket on the motor exhaust (Figure 1/area
no.1). Then bend the flap lightly to insert the other
pin on the flap and insert the other pin to its socket
(Figure 1).
Bekijk gratis de handleiding van BEKO HNT62610BH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | HNT62610BH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5545 MB |
