BEKO HNT62322ZG handleiding
Handleiding
Je bekijkt pagina 10 van 36
10 / EN
Hood / User Manual
3.1 Controlling the appliance
}
Activates the 2nd and 3rd speed levels.
I Press button “I” to operate at 1st speed
level.
When you turn it to the “ ” position, the de-
vice turns off. At the same time, the device
turns off when the slide panel is closed.
II Press button “II” to operate at 2nd speed
level.
III Press button “III” to operate in 3rd speed
level.
3.2 Operating the hood
• Your appliance contains a motor that has vari-
ous speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (I, II, III)
• When the slider panel is opened, the lamp lights
up, when the slider is closed, the lamp goes out.
3.3 Energy efficient usage
• When operating the hood, adjust the speed level
according to the odour and vapour intensity in
order to prevent unnecessary power consump-
tion.
• Use low speeds in normal conditions (I–II), and
high speed (III) when smell and vapours are in-
tensified.
• Lamps on the hood are intended for illuminating
the cooking zone.
• Using them to illuminate the ambient/kitchen
will result in unnecessary power consumption
and inadequate illumination.
• For your device to consume less energy, run it at
a low speed level.
• Your device will reduce energy consumption as
it will run more efficiently when you provide suf-
ficient air intake to it.
• Set your device to the intense suction power
level before the formation of steam, in cases
where you know that the dense steam will occur.
So, you reduce energy consumption by using
your device for a shorter time as it will have a
sufficient air intake.
• Keep the lids of the cookware closed to reduce
the steam evolving.
3.4 Replacement of Lamp
A
• Before replacing the light bulbs,
disconnect the power supply of
the hood.
• Do not touch the light bulbs when
they are hot.
• Be careful not to touch the re-
placed light bulb directly with
hands.
C
You may procure lamps from
Authorised Service Agents.
Remove the aluminium cartridge filter. Remove the
defective bulb and replace with a new one with the
same rating.
• Candle type led lamp is used in this product.
• When changing the lamp, max. 4 W lamp should
be used.
3 Using the appliance
Bekijk gratis de handleiding van BEKO HNT62322ZG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | HNT62322ZG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2910 MB |
