Handleiding
Je bekijkt pagina 28 van 96
EN / 28
selected hob zone. >>> Center the hob
zone by choosing a pot that is wide
enough for the hob zone.
The cooling fan continues to run even
though the hob is turned off.
• This is not an error. The cooling fan con-
tinues to operate until the electronic
equipment inside the hob cools to the ap-
propriate temperature.
There is a noise coming from the hob while
cooking
• There may be some noises coming from
the hob during cooking. These noises de-
pend on the composition of the cook-
ware. These noises are normal, not a
malfunction and are part of induction
technology.
Possible sounds and causes:
• Fan noise: The hob has a fan that auto-
matically operates according to the tem-
perature of the product. The fan has dif-
ferent operating levels and operates at
different levels according to the temper-
ature. After the hob is turned off, if the
temperature is high according to the
product temperature, the fan may con-
tinue to operate for a while.
• Low hum like transformer operation:
This is the nature of induction techno-
logy. Since the heat is transferred directly
to the bottom of the cookware, this kind
of hum may occur depending on the ma-
terial of the cookware. Therefore, differ-
ent sounds may be heard with different
cookware.
• Crackling sound: This is due to the ma-
terial and structure of the bottom of the
cookware. If the cookware is made of dif-
ferent materials and layers, crackling
noise may occur.
• Whistling sound: A whistling sound may
be heard when cooking on two hob zones
on the same side of the hob at different
cooking levels.
Error codes/reasons and possible solutions
Error codes Error reasons Possible solutions
E1 – E11
An induction hob communication er-
ror has occurred.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E 16 - E 21
An induction hob temperature sensor
error has occurred.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E22
E26
Induction hob is overheating.
Turn off the induction hob and wait
for it to cool down. The error will dis-
appear when the hob temperature
drops below the limits. If the problem
persists, contact the authorized ser-
vice.
E23
E24
An induction hob software error has
occurred.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E25
An error occurred in the induction hob
fan operation.
Turn off the induction hob and turn it
back on after 30 seconds. If the prob-
lem persists, contact the authorized
service.
EN
DE
FR
Bekijk gratis de handleiding van BEKO HII 64600 AFT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | HII 64600 AFT |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8961 MB |
