Handleiding
Je bekijkt pagina 24 van 40
EN / 24
• Use pots and pans with processed bases
only. Sharp edges may cause scratches
on the surface.
• Do not use aluminium pots/pans and
pots. Aluminium deteriorates the hob sur-
face.
• Splashes may damage the hob surface
and may cause fire.
• Do not use pots/pans with convex or con-
cave bases.
• Use pots and pans with flat bases only.
These provide easier heat transfer.
• Energy is wasted if the pot diameter is
too small.
Recommended cooking pots/pans sizes
Cooking zone diameter - mm Pot diameter - cm
120 12 – 14
140 14 – 16
180 18 - 20
210 21 - 23
170x265 17 – 19 / 26 - 28
6.2 Operation of the hobs
To operate the vitro-ceramic hobs, the hob
control knobs are used. To obtain your de-
sired cooking level, switch the hob control
knob to the desired level.
The hob(s) may have 3, 6 or 9 operating
levels as per the model of your appliance.
You may select the relevant level for your
cooking type by referring to the table be-
low.
6 levels:
1 : Heating
2 – 3 : Boiling, Resting
4 – 6 : Baking, Frying, Boiling
Turning off the vitro-ceramic zones
Bring the hob knob to OFF position (top).
Excess heat indicator
Vitro-ceramic zones are equipped with an
operating lamp and a hot zone warning in-
dicator.
Hot zone warning indicator shows the posi-
tion of the turned on hob, and it remains lit
after it is turned off. A flickering light on the
hot zone warning indicator is not a mal-
function.
Hob surface may cool down at dif-
ferent periods as per usage. Hob
surface may be hot even when the
warning indicators are not lit. En-
sure that the surface is cooled
down prior to coming to contact
with it. Otherwise, you may burn
your hand!
Bekijk gratis de handleiding van BEKO FTC6701W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FTC6701W |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3708 MB |
