BEKO FSGT52110DXON handleiding
Handleiding
Je bekijkt pagina 18 van 104
EN / 18
Placing the tray on the cooking shelves
On models with wire shelves :
It is also crucial to place the trays on the
wire side shelves properly. While placing
the tray on the desired shelf, its side de-
signed for holding must be on the front.
For better cooking, the tray must be se-
cured on the stopping socket on the wire
shelf. It must not pass over the stopping
socket to contact with the rear wall of the
oven.
On models without wire shelves :
It is also crucial to place the trays on the
side shelves properly. The tray has one dir-
ection when placing it on the shelf. While
placing the tray on the desired shelf, its
side designed for holding must be on the
front.
Stopping function of the wire grill - On
models with wire shelves
There is a stopping function to prevent the
wire grill from tipping out of the wire shelf.
With this function, you can easily and
safely take out your food. While removing
the wire grill, you can pull it forward until it
reaches the stopping point. You must pass
over this point to remove it completely.
Attaching the rotisserie spit
• Fix the food to be grilled to the turn spit
with the forks.
• Place the turn spit frame into the oven by
aligning it with the turn spit driver.
• Insert the sharp edge of the turn spit into
the turn spit driver and place the turn
spit onto the turn spit frame.
• Remove the spit handle while grilling.
Installing the knob protection sheet
Open the oven door and place the knob
protection sheet onto the pins under the
control panel. When knob protection sheet
is installed, oven door remains open.
EN
RO
Bekijk gratis de handleiding van BEKO FSGT52110DXON, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FSGT52110DXON |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11697 MB |
