Handleiding
Je bekijkt pagina 38 van 44
EN / 38
• Do not use hard metal scrapers and ab-
rasive cleaners. They may damage the
surfaces.
• Ensure that the joints of the components
of the product are not left damp and with
detergent. Otherwise, corrosion may oc-
cur on these joints.
9.2 Cleaning Accessories
Do not put the product accessories in a
dishwasher unless otherwise stated in the
user’s manual.
Cleaning the barrier coated accessories
Before using the barrier coated tray for the
first time; place the tray in the oven and op-
erate the oven at 200°C for 40 minutes just
once.
Harsh abrasive cleaning materials should
not be used for cleaning the barrier coated
accessories. Preferably clean by means of
a soft cloth or sponge with a cream surface
cleaner.
Soak your barrier-coated accessories in
warm water for 10 minutes after demand-
ing cooking conditions (functions such as
grill, grill+fan). Then clean with a soft cloth
or sponge.
9.3 Cleaning the hob
Glass cooking surface
Follow the cleaning steps described for the
glass surfaces in the “General cleaning in-
formation” section for the cleaning of glass
cooking surface. You may complete your
cleaning as per the information below for
special cases.
• Sugar-based foods such as dark cream,
starch and syrup should be cleaned im-
mediately, without waiting for the surface
to cool. Otherwise, the glass cooking sur-
face may be permanently damaged.
• Do not use cleaning agents for cleaning
operations you perform while the hob is
hot, otherwise permanent stains may oc-
cur.
9.4 Cleaning the Control Panel
• When cleaning the panels with knob-con-
trol, wipe the panel and knobs with a
damp soft cloth and dry with a dry cloth.
Do not remove the knobs and gaskets un-
derneath to clean the panel. The control
panel and knobs may be damaged.
• While cleaning the inox panels with knob
control, do not use inox cleaning agents
around the knob. The indicators around
the knob can be erased.
• Clean the touch control panels with a
damp soft cloth and dry with a dry cloth.
If your product has a key lock feature, set
the key lock before performing control
panel cleaning. Otherwise, incorrect de-
tection may occur on the keys.
9.5 Cleaning the inside of the oven
(cooking area)
Follow the cleaning steps described in the
"General Cleaning Information" section ac-
cording to the surface types in your oven.
Cleaning the side walls of the oven
The side walls in the cooking area can only
be covered with enamel or catalytic walls. It
varies by model. If there is a catalytic wall,
refer to the “Catalytic surfaces” section for
information.
If your product is a wire shelf model, re-
move the wire shelves before cleaning the
side walls. Then complete the cleaning as
described in the "General Cleaning Informa-
tion" section according to the side wall sur-
face type.
To remove the side wire shelves:
1. Remove the front of the wire shelf by
pulling it on the side wall in the opposite
direction.
2. Pull the wire shelf towards you to re-
move it completely.
Bekijk gratis de handleiding van BEKO FDCA6732CK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FDCA6732CK |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4361 MB |
