Handleiding
Je bekijkt pagina 23 van 40
EN / 23
Final check
1. Reconnect the product to the mains.
2. Check electrical functions.
5 First Use
Before you start using your product, it is re-
commended to do the following stated in
the following sections respectively.
5.1 Initial Cleaning
1. Remove all packaging materials.
2. Remove all accessories from the oven
provided with the product.
3. Operate the product for 30 minutes and
then, turn it off. This way, residues and
layers that may have remained in the
oven during production are burned and
cleaned.
4. Wait for the oven to cool.
5. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
Before using the accessories:
Clean the accessories you remove from the
oven with detergent water and a soft clean-
ing sponge.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
NOTICE: During the first use, smoke and
odour may come up for several hours. This
is normal and you just need good ventila-
tion to remove it. Avoid directly inhaling the
smoke and odours that form.
6 How to use the hob
6.1 General information on hob usage
General warnings
• Do not let any objects to fall on the hob.
Even small objects such as saltshakers
may damage the hob. Do not use cracked
hobs. Water may seep through these
cracks and cause a short circuit. If the
surface is damaged in any way (e.g. vis-
ible cracks), turn off the fuse first, then
call the authorized service to unplug the
product to reduce the risk of electric
shock.
• Do not use unbalanced and easily tilting
pots/pans on the hob.
• Do not heat the pots/pans and pots
empty. The pots and the appliance may
be damaged.
• Always turn off the hob’s burners after
each use.
• You shall damage the appliance if you
operate the hobs without any pot or pots/
pans. Always turn off the hobs after each
operation.
• After each use the cooking surface will
be hot, so do not put the plastic pots/
pans on the cooking surface. Clean such
material on the surface immediately.
• Sudden temperature changes on the
glass cooking surface may cause dam-
age, be careful not to spill cold liquids
during cooking.
• Put a sufficient amount of food in pots
and pans. Thus, you can prevent food
from pouring forth out of the pots/pans
and will not need to clean unnecessarily.
• Do not place the covers of pots and pans
on burners/zones.
• Place the pots by centering them on the
burners/zones. If you wish to place a pot
on a different burner/zone, do not slide it
towards the desired burner; rather, lift it
first and then put it on the other burner.
Tips for hobs with vitro-ceramic surfaces
• Vitro-ceramic surface is heat resistant
and it is not affected by high temperature
differences.
• Do not use vitro-ceramic surface as a
surface where you can place something
on it or as a cutting surface.
Bekijk gratis de handleiding van BEKO FDC6701W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FDC6701W |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3803 MB |
