BEKO FDC6701S handleiding

40 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 36 van 40
EN / 36
8. Pull the removed door upwards to re-
lease it from the right and left hinges
and remove it.
To reattach the door, the proced-
ures applied when removing it must
be repeated from the end to the be-
ginning, respectively. When in-
stalling the door, be sure to close
the clips on the hinge socket.
9.8 Removing the Inner Glass of The
Upper Oven Door
Inner glass of the product's front upper
oven door may be removed for cleaning.
1. Open the oven door.
1 Screw
2 Profile
3 Inner glass pane
4 Plastic slot
2. Take out the screw(1) with a screw-
driver.
3. Take out the profile (2) than hold up to
inner glass (3).
4. If your product is equipped with interme-
diate glass panel; Pull the glass holder
connecting elements in the middle as il-
lustrated in the figure to free them from
the glass panels.
5 Glass holder connecting element*
* It varies depending on the product model. It
may not be available on your product.
5. Then group the door again, put the glass
pane (3) to the plastic slots (4) and
group the profile.
9.9 Cleaning the Oven Lamp
In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
water and a soft cloth or sponge and dry
with a dry cloth. In case of oven lamp fail-
ure, you can replace the oven lamp by fol-
lowing the sections that follow.
Replacing the oven lamp
General warnings
To avoid the risk of electric shock before
replacing the oven lamp, disconnect the
product and wait for the oven to cool. Hot
surfaces may cause burns!
This oven is powered by an incandescent
lamp with less than 40 W, less than 60
mm in height, less than 30 mm in dia-
meter, or a halogen lamp with G9 sockets
with less than 60 W power. Lamps are
suitable for operation at temperatures
above 300 °C. Oven lamps are available
from Authorised Services or licensed
technicians. This product contains a G
energy class lamp.
The position of the lamp may differ from
that is shown in the figure.
The lamp used in this product is not suit-
able for use in the lighting of home
rooms. The purpose of this lamp is to
help the user see food products.
The lamps used in this product must
withstand extreme physical conditions
such as temperatures above 50 °C.

Bekijk gratis de handleiding van BEKO FDC6701S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBEKO
ModelFDC6701S
CategorieFornuis
TaalNederlands
Grootte3803 MB