BEKO FBSHT62111GX handleiding
Handleiding
Je bekijkt pagina 44 van 104
EN / 44
• Discolorations and stains on the glass
surface are normal and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted surfaces
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry
them with a dry cloth.
• Do not use hard metal scrapers and ab-
rasive cleaners. They may damage the
surfaces.
• Ensure that the joints of the components
of the product are not left damp and with
detergent. Otherwise, corrosion may oc-
cur on these joints.
9.2 Cleaning Accessories
Do not put the product accessories in a
dishwasher unless otherwise stated in the
user’s manual.
9.3 Cleaning the hob
Cleaning the gas burners
1. Before cleaning the hob, remove pot
holders, burner caps and heads from the
hob.
2. Clean the surface of the hob as per the
recommendations included in the gen-
eral cleaning information according to
the surface type (enamelled, glass, inox,
etc.).
3. Clean the burner chamber with a cloth
soaked in detergent or with non-scratch-
ing, soft brush. Ensure that no food re-
mains are left.
4. Clean the spark plugs and thermal ele-
ments (in models with ignition and
thermal element) with a well squeezed
cloth. Then dry with a clean cloth. Pay
attention that the spark plug and the
thermal element are completely dry.
5. Clean the burner caps and heads with
detergent water after each operation
and then dry them.
6. For persistent stains, keep burner caps
and heads in detergent water or warm
soapy water at least for 15 minutes.
Clean with a non-metallic and non-
scratching brush.
7. You may use the Quick&Shine cleaning
agents for the oven interiors and grills,
used on enamelled surfaces and recom-
mended by the authorized service, espe-
cially for persistent stains on enamelled
burner caps.
8. Do not contact burner caps with ag-
gressive detergents such as oven in-
terior cleaning agents, descalers while
cleaning them, this may cause discol-
ouration.
9. Clean the pot holders with detergent wa-
ter and non-scratching, soft brush after
each operation and then dry them.
10.When the burner caps and pot holders
are used as wet, persistent lime stains
may occur as a result of the heat. En-
sure that it is dried before operation.
11.Place burner heads, caps and pot hold-
ers respectively.
12.When placing the pot holders, ensure
that they centre the burners. In pin mod-
els, fit the pins on the burner plate to the
pin slots on the pot holders.
Assembling the burner parts
1. Place the parts as in the figure after
cleaning the burners.
2. Place the burner head ensuring that it
passes through the burner spark plug
(4). Turn the burner head right and left
to make sure that it is seated in the
burner chamber.
3. Place the burner cap on the burner
head.
EN
RO
Bekijk gratis de handleiding van BEKO FBSHT62111GX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FBSHT62111GX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11241 MB |
