BEKO FBGT62110GWO handleiding
Handleiding
Je bekijkt pagina 31 van 100
EN / 31
7. Fit new injector.
1 Grill burner
2 Injector holder
3 Injector
Exchange of injector for the oven
1. Turn all control knobs to off positions
on the control panel.
2. Shut off the gas supply.
3. Remove the screws shown below on the
rear wall.
4. Remove the rear wall.
5. Remove the 2 screws (2) located on the
injector holder (1).
1 Injector holder
2 Screw
6. Remove the injector holder.
7. Remove the injector in the injector
holder by turning it counterclockwise.
8. Install the new gas injector.
Reduced flow adjustment for the gas oven
For the appropriate functioning of the oven
re-checking the by-pass adjustment is ex-
tremely important. In order to provide max-
imum security to the user these operations
have to be done with care.
1. Ignite the burner that is to be adjusted
and turn the knob to the high flame posi-
tion.
2. Close the oven door and wait for 10 to
15 minutes until the oven becomes
ready for adjustment.
3. Take out the knob
4. After 15 minutes, adjust the oven to the
lowest flame position.
EN
RO
Bekijk gratis de handleiding van BEKO FBGT62110GWO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FBGT62110GWO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10858 MB |
