Handleiding
Je bekijkt pagina 41 van 100
EN / 41
• Under no circumstances should the
dried-up residue on the glass surface be
cleaned off with serrated knives, wire
wool or similar scratching tools.
• You can remove the calcium stains (yel-
low stains) on the glass surface with the
commercially available descaling agent,
with a descaling agent such as vinegar or
lemon juice.
• If the surface is heavily soiled, apply the
cleaning agent on the stain with a sponge
and wait a long time for it to work prop-
erly. Then clean the glass surface with a
wet cloth.
• Discolorations and stains on the glass
surface are normal and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted surfaces
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry
them with a dry cloth.
• Do not use hard metal scrapers and ab-
rasive cleaners. They may damage the
surfaces.
• Ensure that the joints of the components
of the product are not left damp and with
detergent. Otherwise, corrosion may oc-
cur on these joints.
9.2 Cleaning Accessories
Do not put the product accessories in a
dishwasher unless otherwise stated in the
user’s manual.
9.3 Cleaning the hob
Electric hobs
1. Turn off the hotplates and wait until they
cool down.
2. If necessary, clean the hotplates with a
cleaning agent (you can obtain clean-
ers/softeners from specialty stores).
3. Warm only for a few minutes after
cleaning in order to have their top sec-
tion dried.
4. Apply a thin layer of machine oil onto
the top surface of the hotplate regularly
in order to protect it.
Cleaning the gas burners
1. Before cleaning the hob, remove pot
holders, burner caps and heads from the
hob.
2. Clean the surface of the hob as per the
recommendations included in the gen-
eral cleaning information according to
the surface type (enamelled, glass, inox,
etc.).
3. Clean the burner chamber with a cloth
soaked in detergent or with non-scratch-
ing, soft brush. Ensure that no food re-
mains are left.
4. Clean the spark plugs and thermal ele-
ments (in models with ignition and
thermal element) with a well squeezed
cloth. Then dry with a clean cloth. Pay
attention that the spark plug and the
thermal element are completely dry.
5. Clean the burner caps and heads with
detergent water after each operation
and then dry them.
6. For persistent stains, keep burner caps
and heads in detergent water or warm
soapy water at least for 15 minutes.
Clean with a non-metallic and non-
scratching brush.
7. You may use the Quick&Shine cleaning
agents for the oven interiors and grills,
used on enamelled surfaces and recom-
mended by the authorized service, espe-
cially for persistent stains on enamelled
burner caps.
8. Do not contact burner caps with ag-
gressive detergents such as oven in-
terior cleaning agents, descalers while
cleaning them, this may cause discol-
ouration.
EN
BG
Bekijk gratis de handleiding van BEKO FBE64010WDN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FBE64010WDN |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10894 MB |
