Handleiding
Je bekijkt pagina 31 van 100
EN / 31
1
Flow rate adjustment screw
Leakage check at the injectors
Before carrying out the conversion on the
product, ensure all control knobs are turned
to off position. After the correct conversion
of injectors, for each injectors should be
gas leak checked.
1. Make sure that the gas supply to the
product is on, still maintaining all con-
trol knobs turned to off position.
2. Each injector hole is blocked with a fin-
ger applying reasonable force to stop
the gas leakage when corresponding
control knob turned to on and it held at
depressed position to allow gas reach
the injector.
3. Apply prepared soapy water at the in-
jector connection with a small brush, if
there is leakage of gas at the injector
connection the soapy water will begin
to froth. In this case, tighten the in-
jector with a reasonable force and re-
peat step 3 process once again.
4. If the froth still persist you must turn
off the gas apply to the product imme-
diately and call an Authorised service
agent or technician with licence. Do not
use the product until the authorized
service has intervened in the product.
5 First Use
Before you start using your product, it is re-
commended to do the following stated in
the following sections respectively.
5.1 Initial Cleaning
1. Remove all packaging materials.
2. Remove all accessories from the oven
provided with the product.
3. Operate the product for 30 minutes and
then, turn it off. This way, residues and
layers that may have remained in the
oven during production are burned and
cleaned.
4. When operating the product, select the
highest temperature and the operating
function that all the heaters in your
EN
BG
Bekijk gratis de handleiding van BEKO FBE64010WDN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | FBE64010WDN |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10894 MB |
