BEKO EBA 5000 B handleiding
Handleiding
Je bekijkt pagina 13 van 73
13 / EN
Digital Bladeless Fan / User Manual
4 Use
4.2 Remote control
Button Function description
On/Off button:
In the standby state, press the
power button to start the fan.
The default gear is 3. Press it
again to shut down.
Swing button
Press this key to switch the
swing(left&right) angle in turn:
30°,60°,90°,120°,Off.
Press the “+” button on the re-
mote control to increase the
air volume.
Press the “-” button to de-
crease the air volume
Mode button
Press this key to switch the
air modes in turn: Strong air-
speed mode, Sleep Mode,
Natural air-speed mode, Exit
mode.
Strong mode: “ ’’ air speed
becomes the highest.
Sleep mode: ‘‘ ’’ The maxi-
mum speed in sleep mode is
level 10. The wind speed will
gradually drop from Speed 10
to Speed 2 over a period of 4
hours. After that it will keep
running at Speed 2. This is re-
peated until level 2 is reached.
Natural mode: “ ’’ Simula-
tion of natural wind.
The speed is reduced or in-
creased by 4 levels of the set
ventilation level.
Note: The lowest speed that
can be set in natural mode is
therefore level 5 and the high-
est speed is level 16.
Press the Air speed key to exit
the current Air mode.
Timer button
Press the timer button to set
1-8-0 hours.After the timer
function is set, other func-
tions can be used normally.
When the device is turned
off, the timing setting is also
canceled.
NOTE: A small dot flashes at
the bottom right of the display
to simulate the timer.
Remove the insulation sheet before use.
Bekijk gratis de handleiding van BEKO EBA 5000 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | EBA 5000 B |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 5838 MB |