Handleiding
Je bekijkt pagina 7 van 108
108108
Split type air conditioner / User Manual 7 / 108 EN
6 / 112 EN
Split Type Air Conditioner / User Manual
•
If the air conditioner is used
together with burners or other
heating devices, thoroughly
ventilate the room to avoid
oxygen deficiency.
•
In certain functional
environments, such as
kitchens, server rooms, etc.,
the use of specially designed
air-conditioning units is highly
recommended.
Cleaning and maintenance
warnings
•
Turn off the device and
disconnect the power before
cleaning. Failure to do so can
cause electrical shock.
•
Do not clean the air
conditioner with excessive
amounts of water.
•
Do not clean the air
conditioner with combustible
cleaning agents. Combustible
cleaning agents can cause fire
or deformation.
Caution
•
Turn off the air conditioner and
disconnect the power if you are
not going to use it for a long
time.
•
Turn off and unplug the unit
during storms.
•
Make sure that water
condensation can drain
unhindered from the unit.
•
Do not operate the air
conditioner with wet hands.
This may cause electric shock.
•
Do not use device for any
other purpose than its intended
use.
•
Do not climb onto or place
objects on top of the outdoor
unit.
•
Do not allow the air conditioner
to operate for long periods of
time with doors or windows
open, or if the humidity is very
high.
Electrical warnings
•
Only use the specified power
cord. If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
1 Safety precautions
7 / 112 EN
Split Type Air Conditioner / User Manual
•
Keep power plug clean.
Remove any dust or grime that
accumulates on or around the
plug. Dirty plugs can cause fire
or electric shock.
•
Do not pull power cord to
unplug unit. Hold the plug
firmly and pull it from the
outlet. Pulling directly on the
cord can damage it, which can
lead to fire or electric shock.
•
Do not modify the length of
the power supply cord or use
an extension cord to power the
unit.
•
Do not share the electrical
outlet with other appliances.
Improper or insufficient power
supply can cause fire or
electrical shock.
•
The product must be properly
grounded at the time of
installation, or electrical shock
may occur.
•
For all electrical work, follow
all local and national wiring
standards, regulations, and the
Installation Manual. Connect
cables tightly, and clamp them
securely to prevent external
forces from damaging the
terminal. Improper electrical
connections can overheat and
cause fire, and may also cause
shock. All electrical connections
must be made according to the
Electrical connection diagram
located on the panels of the
indoor and outdoor units.
•
All wiring must be properly
arranged to ensure that the
control board cover can close
properly. If the control board
cover is not closed properly,
it can lead to corrosion and
cause the connection points on
the terminal to heat up, catch
fire, or cause electrical shock.
•
If connecting power to
fixed wiring, an all-pole
disconnection device which
has at least 3mm clearances
in all poles, and have a leakage
current that may exceed 10mA,
the residual current device
(RCD) having a rated residual
operating current not exceeding
30mA, and disconnection must
be incorporated in the fixed
1 Safety precautions
Bekijk gratis de handleiding van BEKO BRVPF095, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BRVPF095 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 10539 MB |
