Handleiding
Je bekijkt pagina 19 van 22
Cooker Hood / User Manual
19 / EN
6
Troubleshooting
Troubleshooting Root Cause Help
No symbol is shown on the dis-
play, the hood does not respond to
pressing the control fields.
The touch control is probably sus-
pended.
Disconnect the hood from the power
supply for about 15 sec. and switch
it on again.
The hood has very poor vapor
suction.
Probably cause is dirty filters. The grease filter must be cleaned
in the dishwasher or replace with a
new one.
One or more light points do not
operate.
Defective halogen/LED bulb. The light bulb needs to be replaced
with a new, compatible with the
symbol specified in the instruction
manual for the cooker hood.
The hood generated excessive
noise and vibration.
This may be caused by an incor-
rect installation of the hood to the
wall or kitchen cabinets. Not all
provided screws have been used
or screws are loosely fitted leaving
clearance.
The hood must be mounted to a wall
or cabinet by using all the points pro-
vided for by the manufacturer. After
adjusting the position of the hood hor
If the recommendations above do not solve the problem, contact an authorised service agent entitled to repair.
Under no circumstances is the hood user entitled to independent repair.
Bekijk gratis de handleiding van BEKO BRH90CX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BRH90CX |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 1677 MB |
