BEKO BP412C handleiding
Handleiding
Je bekijkt pagina 40 van 88
40 / EN
Local air conditioner/User Manual
Troubles Possible Causes Suggested Remedies
1. Unit does not start
when pressing on/
off button
Water full indicator lamp blinks, and
water tray is full.
Dump the water out of the water
tray.
Room temperature is higher than the
setting temperature. (Electric heating
mode)
Reset the temperature
Room temperature is lower than the
setting temperature. (Cooling mode)
Reset the temperature
2. Not cool enough The doors or windows are not
closed.
Make sure all the windows and
doors are closed.
There are heat sources inside the
room.
Remove the heat sources if possible
Exhaust air hose is not connected or
blocked.
Connect or clean the exhaust air
hose.
Temperature setting is too high. Reset the temperature
Air inlet is blocked. Clean the air inlet.
3. Noisy The ground is not level or not flat
enough
Place the unit on a flat, level ground
if possible
The sound comes from the flowing
of the refrigerant inside the air
conditioner
It is normal.
4. EO Code Room temperature sensor failed Replace room temperature sensor
(the unit can also work without
replacement.)
5. E1 Code Condenser temperature sensor
failed
Replace condenser temperature
sensor
6. E2 Code Water tray full Take off rubber stopper and empty
the water.
7. E3 Code Evaporator temperature sensor
failed
Replace evaporator temperature
sensor
C
Note:
The real products may look
different.
9 Troubleshooting
Bekijk gratis de handleiding van BEKO BP412C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BP412C |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6776 MB |
