BEKO BP412C handleiding
Handleiding
Je bekijkt pagina 34 van 88
34 / EN
Local air conditioner/User Manual
- Press the “Fan Speed” button to select wind
speed.
3. Dehumidifying operation
Press the “Mode” button till the “Dehumidify” icon
appears.
- Automatically set the selected temperature to
current room temperature minus 2°C.
- Automatically set the fan motor to LOW wind
speed.
4. Fan operation
- Press the “Mode” button till the “Fan” icon
appears.
- Press the “Fan Speed” button to select wind
speed.
5. Timer operation
Timer ON setting
- When the air-conditioner is OFF, press the
‘Timer’ button and select a desired ON time
through the temperature and time setting
buttons.
- Preset “ON Time” hours will keep shown at
88 display part all the time once ON Timer is
set. ON time can be regulated at anytime in
0-24 hours.
- To deactivate the timer function press “Timer
button 2 times continuously until the preset
Timer display turns off.
Timer OFF setting
- When the air-conditioner ON, press ‘Timer’
button and select a desired OFF time through
the temperature and time setting buttons.
- “Preset OFF Time”will be shown on “88”
display for one minute. OFF time can be
regulated at anytime in 0-24 hours.
- Preset “OFF Time” hours will shown at “88”
display part for 1 minute, and then the setting
temperature will keep shown in the “88”
display.
Repress ‘Timer’ button, the remain “OFF
Time” hours will displayed on the “88” display.
- To deactivate the timer function, press “Timer
button 2 times continuously until the preset
timer display turns off.
6. SLEEP mode
- While in cooling mode, press the SLEEP
key for 3 seconds to set the temperature.
It increases 1 °C after an hour and at most
increases 2 °C after 2 hours.
- While in heating mode, press the SLEEP
key for 3 seconds to set the temperature. It
decreases 1 °C after an hour and at most
decreases 2 °C after 2 hours.
- Press the SLEEP key for 3seconds again can
cancel the setting.
7. Zone follow function
- You can switch on or off the Zone follow
function through the remote controller;
- When this function is on, the unit will
control the temperature of the room by
the temperature sensor inside the remote
controller (the room temperature sensor
inside the machine will not work again)
- This function will be off if the unit have not
received the signal from the remote controller
in 30 minutes. It will switch to the normal
room temperature sensor inside the unit to
control the temperature.
8. Water Drainage
Water Full Alarm Function
- The inner water tray in the air-conditioner
has one water level safety switches, it
controls the water level. When water level
reaches an anticipated height, the water full
indicator lights up. When the water is full,
please remove the rubber blockage from the
drainage hole at the bottom of unit, and drain
all water outside.
6 Operation introduction
Bekijk gratis de handleiding van BEKO BP412C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BP412C |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6776 MB |
