Handleiding
Je bekijkt pagina 31 van 84
Split type air conditioner / User Manual
31 / 44 EN
7.1 Emergency run
When the remote contr
oller is missing or the
batteries are run out, you can use the Emergency
Button.
Operation method:
Under the “OFF” condition, open the front board
and press Emergency Button with the tip end
of a ball-pen or the like and the Air conditioner
will operate in “AUTO” mode. Press Emergency
Button again to switch off the unit.
7.2 Clean
When you activ
ate the “Clean” function on remote
controller. Air conditioner will start the cleaning
process in follwoing 3 steps:
a. Frosting: the evaporator temperature drop
down sharply, the frost and ice are created.
b-1. Heating and melting: turbo heating is on to
melt the ice and dry the water
. Evaporator
turning to high temperature and reach 55°C
during the process. (for heat pump models)
b-2. Operation and melting of internal fan: the
operation of fan accelerates the melting of
ice into water. (for cooling only models)
c. Drying: the dust is r
emoved.
C
Note: The process will tak
e
30-60minutes in total, which
depends on different product
models.
A
Warning:
Stay awa
y from air
conditioner when the function in
process.
7.3 Sleep operation
1. When air conditioner is in ON status, press
“SLEEP” button to enter “SLEEP” mode, and
will display on the r
emote controller.
2. Press “SLEEP” button again,
will disappear
on the remote contr
oller, and the sleep (energy
saving) function will be cancelled.
C
Note:
1. Function a: In sleep mode,
the set temperature will be
increased after running 1 hour
in cool and DRYmode; it will
be decreased after running 1
hour in heating mode. The set
temperature will be controlled
between 16°C and 32°C. When
air conditioner is in sleep mode,
the highest indoor fan speed is
set at medium level, but user
can change the fan speed by
remote controller.
2. Function b: In sleep mode, the
set temperatur
e and the indoor
fan speed will not change,
but the display screen of air
conditioner will shut off except
for the “RUN” indicator.
3. Function a or function b is
optional, and it is designed
alr
eady before the product is
dispatched from manufactory.
7 Operating method
Bekijk gratis de handleiding van BEKO BMVIH 181, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BMVIH 181 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 8775 MB |
