BEKO BM5DFT48437WB handleiding
Handleiding
Je bekijkt pagina 17 van 48
EN / 17
of the hose into the waste water or do
not insert it into the drain for more than
15 cm. If it is too long, cut it short.
5. The end of the hose should not be bent,
it should not be stepped on and the
hose must not be pinched between the
drain and the product. Otherwise, water
discharge issues may emerge.
6. If the length of the hose is too short, use
it by adding an original extension hose.
The overall length of the hose shall not
be longer than 3.2 m. To prevent water
leaks, always secure the connection
between the extension hose and the
draining hose of the product with a suit-
able clamp so that it does not come off
and cause leaks.
4.7 Adjusting the Feet
NOTICE
In order to ensure that the product
operates more silently and vibra-
tion-free, it must stand level and
balanced on its feet. Adjust the feet
to ensure balance. Otherwise, the
product may move from its place
and cause bumping, noise and vi-
bration problems.
1. To loosen the nuts on the feet, rotate
the nuts clockwise using the hand tool.
2. Adjust the feet until the product stands
level and stable. To lower the feet, ro-
tate them counterclockwise. To raise
the feet, rotate them clockwise.
3. To retighten the nuts, rotate them coun-
terclockwise using the hand tool.
4.8 Electrical Connection
Connect the product to a grounded outlet
protected by a 16-amp fuse. Our company
shall not be responsible for the damages
that shall be incurred due to using the
product without grounding according to
local regulations.
• Connection must comply with national
regulations.
• The electrical connection cable infra-
structure of the product must be ad-
equate and suitable for product require-
ments. It is recommended to use a
Ground Fault Circuit Breaker (GFCI).
• Power cable plug must be within easy
reach after installation.
• If the current supply to the fuse or
breaker in the house is less than 16 amp,
have a qualified electrician install a 16-
amp supply.
• Your mains voltage must comply with the
voltage specified in the “technical spe-
cifications” section.
• Do not make connections via extension
cables or multi-plugs. Overheating and
burning may occur due to the connecting
cable.
Damaged power cables should be
replaced by the authorised service
in order to prevent possible danger.
4.9 Handling the Product
1. Unplug the product before handling it.
2. Disconnect the water outlet and water
main connections. 3 Drain all the water
that remains in the product. See Drain-
ing Remaining Water and Cleaning the
Pump Filter
3. Install the shipping bolts in reverse or-
der of the disassembly procedure. See
Removing the Shipping Bolts
Bekijk gratis de handleiding van BEKO BM5DFT48437WB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BM5DFT48437WB |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4182 MB |
