BEKO BHCA96641BFBHSE handleiding
Handleiding
Je bekijkt pagina 18 van 36
EN / 18
3. Place the lug slots of your new carbon
filters into the lugs on the motor holder
and turn them clockwise to snap them
into place.
4. Close the hood glass cover after in-
stalling the aluminium filter.
6 Troubleshooting
If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Never try
to repair your product yourself.
Product is not working.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The product may not be plugged in. >>>
Check if the product is plugged in to the
outlet or not.
• The speed button may not be set. >>>
Press/touch the desired speed button.
• There may be no electricity. >>> Ensure
the mains is operational and check the
fuses in the fuse box. Change the fuses
if necessary or reactivate them.
Hood light is not on.
• Hood lamp may be faulty. >>> Contact
your local dealer where you purchased
your product or the Customer Service,
and ensure that the lamp is replaced.
• There may be no electricity. >>> Ensure
the mains is operational and check the
fuses in the fuse box. Change the fuses
if necessary or reactivate them.
“Hob to Hood” function is not working.
(For model B)
• Hood or hob control panel might be
covered with an object. >>> Remove the
object and reactivate the function over
the hob.
• You might be using a pot which might
block the signal between the hob and the
hood. >>> Place your pot onto the hob in
such a way not to block the signal.
Bekijk gratis de handleiding van BEKO BHCA96641BFBHSE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BHCA96641BFBHSE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3517 MB |
