BEKO BHCA67841BBHSI handleiding
Handleiding
Je bekijkt pagina 19 van 84
EN / 19
Removing aluminium filters
There are two aluminium filters in your
product, one is under the hood glass door
and the other one is under the hood. To re-
move these filters:
1. Reach the filter under the glass door by
opening the hood door upwards.
2. Pull down the locks of the aluminium fil-
ters as shown in the figure.
3. Gently pull the filters towards yourself
first and pull it upwards to remove it
from its slot.
There are two seals with magnet-
effect on the edges of the filter un-
der the glass door. Do not remove
these seals when removing the fil-
ter.
4. Reinstall the aluminium filters in their
slots after flushing by following the
above steps in reverse order.
6.5 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without
a flue, you should replace your carbon fil-
ters every 4 months in normal use. You
can obtain the carbon filter from Author-
ized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.
In carbon-filtered usage, the sound
level increases and the flow rate
performance decreases.
Removing carbon filters
1. Open the glass cover of the hood and re-
move the aluminium filter.
2. Unscrew the carbon filters on the right
and left of the motor holder.
3. Place the lug slots of your new carbon
filters into the lugs on the motor holder
and turn them clockwise to snap them
into place.
4. Close the hood glass cover after in-
stalling the aluminium filter.
EN
PL
RO
ES
Bekijk gratis de handleiding van BEKO BHCA67841BBHSI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BHCA67841BBHSI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7735 MB |
