BEKO BDIS16030 handleiding
Handleiding
Je bekijkt pagina 36 van 48
EN / 36
To ensure that the water remaining
on the dishes and inside the dish-
washer is completely drained and
that the water softener is removed
after rinsing operation, it resumes
operation at drying cycle after keep-
ing silent for a while
7.8 Cancelling the Cycle
Open the dishwasher door and press Select
Cycle / Cancel Cycle button for three
seconds. Release the key when the Start
Hold indicator starts flashing. Discarding
process will be completed within 2 minutes
and your dishwasher will beep when it is
done.
Detergent or rinse aid may remain
inside the dishwasher and/or the
dishes being washed as per the
step of the program you have can-
celled.
7.9 Low Salt Warning Indicator
Check the low salt indicator on the screen
of your dishwasher to see if you have
softening salt in your dishwasher. Add salt
to the salt reservoir when the low salt indic-
ator on the display comes on.
The Water Softening System sec-
tion describes how to set the water
hardness level.
7.10 Low Rinse Aid Warning Indic-
ator
Check the low rinse aid indicator on the
screen of your dishwasher to see in you
have enough rinse aid in your dishwasher.
Add rinse aid to the rinse aid reservoir
when the low salt indicator on the display
comes on.
7.11 Setting the Rinse Aid Amount
1.After turning on your dishwasher, press
and hold the Delay and Start Wait Cancel
buttons respectively.
2. Turn LED 6 on by using the delay key.
3. You may set the dosage level with the
function keys.
1. If the cycle indicator is on - Rinse aid is
not used
2. If the cycle indicator is on – add 1 dose
of rinse aid.
3. If the cycle indicator is on – add 2 dose
of rinse aid.
4. If the cycle indicator is on – add 3 dose
of rinse aid.
1,2,3,4. If the cycle indicators are lit to-
gether – add 4 doses of rinse aid.
4. Exit from the settings menu by pressing
on/off button. Your settings shall be saved
automatically.
7.12 End of Program
When the washing cycle you have
selected is finished, a signal tone
will alert you to switch off the dish-
washer. This signal tone will warn
you at certain intervals and then
switch off.
Cycle End indicator illuminates when the
washing cycle has ended.
1.Open the cover of the dishwasher.
2.Turn your dishwasher off by pressing the
On / Off key.
3.Switch off the tap.
4.Remove the plug from the outlet.
Your dishwasher turns off automat-
ically after a certain period to save
energy when the cycle is ended or
not started.
After washing your dishes, keep
them inside the dishwasher for ap-
proximately 15 minutes to cool.
Your dishes will dry faster if you
leave the door of your dishwasher
ajar during this time. This shall im-
prove the drying efficiency of the
dishwasher.
Bekijk gratis de handleiding van BEKO BDIS16030, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIS16030 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5448 MB |
