BEKO BDIN38560PF handleiding
Handleiding
Je bekijkt pagina 43 van 56
EN / 43
4. Clean all three filters under the tap with
a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the micro fil-
ter. Make sure it is properly seated.
Turn clockwise until you hear a click.
The machine should not be used
without a filter.
Failure to install the filters correctly
will reduce washing effectiveness.
8.3 Cleaning the hose filter
The filter on the water inlet hose prevents
dirt (sand, clay, rust, etc.) that may come
from the city network or your water system
from damaging the machine. Check the fil-
ter and hose from time to time and clean
them if necessary.
1. Turn off the tap and remove the hose.
2. After removing the filter from the hose,
clean it under the tap.
3. Place the cleaned filter back into its
place inside the hose.
4. Attach the hose to the faucet.
(Model dependent)
8.4 Cleaning the propellers
Clean the impellers at least once a week to
ensure efficient operation of the machine.
Lower propeller
Check if the lower impeller (1) holes are
clogged. If there is a blockage, remove the
impeller and clean it. You can remove the
lower impeller by pulling it upwards (de-
pending on the model)
Check if the holes of the impeller assembly
are clogged. If there is a blockage, remove
the impeller assembly and clean it. (De-
pending on the model)
Bekijk gratis de handleiding van BEKO BDIN38560PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIN38560PF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7011 MB |
