BEKO BDIN38560PF handleiding
Handleiding
Je bekijkt pagina 41 van 56
EN / 41
Dishwasher softens the water as
per the hardness of the mains wa-
ter. The washing cycle time may
also change while the cycle is being
executed as a result of the room
temperature, mains water temper-
ature and the amount of dishes.
Pay attention to avoid opening of
the door while the dishwasher is be-
ing operated. Be careful as steam
may come out when you open the
door of the dishwasher.
To ensure that the water remaining
on the dishes and inside the dish-
washer is completely drained and
that the water softener is removed
after rinsing operation, it resumes
operation at drying cycle after keep-
ing silent for a while.
7.9 Cancelling the Cycle
Open the dishwasher door and press Select
Cycle / Cancel Cycle button for three
seconds. After the 3 - 2 - 1 countdown, the
display will show 0:01, close the door of the
dishwasher and wait until the draining pro-
cess is completed. Discarding process will
be completed within 2 minutes and your
dishwasher will beep when it is done.
Detergent or rinse aid may remain
inside the dishwasher and/or the
dishes being washed as per the
step of the program you have can-
celled.
7.10 Low Salt Warning Indicator
Check the low salt indicator on the screen
of your dishwasher to see if you have
softening salt in your dishwasher. Add salt
to the salt reservoir when the low salt indic-
ator on the display comes on.
The Water Softening System sec-
tion describes how to set the water
hardness level.
7.11 Low Rinse Aid Warning Indic-
ator
Check the low rinse aid indicator on the
screen of your dishwasher to see in you
have enough rinse aid in your dishwasher.
Add rinse aid to the rinse aid reservoir
when the low salt indicator on the display
comes on.
7.12 Setting the Rinse Aid Amount
1.After turning on your dishwasher, press
the Menu button for 3 seconds.
In some models, you just need to
press the menu key 1 time to ac-
cess the settings menu.
2.With the <- and +> buttons, it comes to
“P:” on the display.
3.Set to a proper level with the Select key.
4.Turn off your dishwasher with On / Off
button to save.
Applies no rinse aid in P:0 position during
washing programme.
Applies 1 dose of rinse aid in the P:1 posi-
tion.
Applies 2 dose of rinse aid in the P:2 posi-
tion.
Applies 3 dose of rinse aid in the P:3 posi-
tion.
Applies 4 dose of rinse aid in the P:4 posi-
tion.
7.13 End of programme
When the programme you have selected
ends, an audible warning will alert you to
switch off the dishwasher.
This audible warning is repeated at regular
intervals until your dishwasher switches
off.
Programme End indicator illuminates when
the washing programme has ended.
1.Open the cover of the dishwasher.
2.Press the On/Off key to switch off your
dishwasher
3.Switch off the tap.
4.Unplug the dishwasher from the socket.
Bekijk gratis de handleiding van BEKO BDIN38560PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIN38560PF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7011 MB |
