BEKO BDIN38560PF handleiding
Handleiding
Je bekijkt pagina 18 van 56
EN / 18
Hardness Level
English Hardness
°dE
German Hardness
°dH
French Hardness
°dF
Water Hardness Level Indicator
0. Level
0-5 0-4 0-8
Bring the water hardness setting
to position 1 by pressing the Se-
lect key. (r1)
1. Level
6-9 5-7 9-13
Bring the water hardness setting
to position 1 by pressing the Se-
lect key. (r1)
2. Level
10-15 8-12 14-22
Bring the water hardness setting
to position 2 by pressing the Se-
lect key. (r2)
3. Level
16-19 13-15 23-27
Bring the water hardness setting
to position 3 by pressing the Se-
lect key. (r3)
4. Level
20-24 16-19 28-34
Bring the water hardness setting
to position 4 by pressing the Se-
lect key. (r4)
5. Level
25-62 20-50 35-90
Bring the water hardness setting
to position 5 by pressing the Se-
lect key. (r5)
Table1: Water Hardness Level Setting
Table
Make the same hardness level you set on
the control panel with the regeneration ad-
justment switch. For example, if the setting
on the control panel is 3, set the regenera-
tion setting switch to 3.
• If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, it is recommended to use
filters and water purifiers.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
• If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
In case of relocation, you need to
adjust the water hardness setting
of your dishwasher again according
to the water hardness of the place
you move to, taking into account
the information given above. If the
water hardness setting of your dish-
washer has been adjusted before,
the last water hardness setting will
be displayed on the screen of your
dishwasher.
Mechanical Water Hardness Adjustment
The glassware care setting is used to alter
the hardness of the pre-softened wash wa-
ter in the dishwasher. Make the adjustment
according to the water hardness setting.
Make the adjustment using a wide, flat
screwdriver. Use the screwdriver to turn the
mechanical glassware care adjustment
Bekijk gratis de handleiding van BEKO BDIN38560PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIN38560PF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7011 MB |
