BEKO BDIN25440 handleiding
Handleiding
Je bekijkt pagina 18 van 48
EN / 18
3. Level
16-19 13-15 23-27
Bring the water hardness setting
to position 3 by pressing the Se-
lect key. (r3)
4. Level
20-24 16-19 28-34
Bring the water hardness setting
to position 4 by pressing the Se-
lect key. (r4)
5. Level
25-62 20-50 35-90
Bring the water hardness setting
to position 5 by pressing the Se-
lect key. (r5)
Table1: Water Hardness Level Setting
Table
• If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, it is recommended to use
filters and water purifiers.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
• If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
In case of relocation, you need to
adjust the water hardness setting
of your dishwasher again according
to the water hardness of the place
you move to, taking into account
the information given above. If the
water hardness setting of your dish-
washer has been adjusted before,
the last water hardness setting will
be displayed on the screen of your
dishwasher.
6.4 Filling the salt
The water softening system must be re-
newed in order for the dishwasher to oper-
ate at the same performance at all times.
Dishwasher salt is used for this purpose.
Only use special softening salt for
use in dishwashers.
It is recommended to use granu-
lated or powdered softening salts in
the water softening system. Do not
use salts such as table salt and
rock salt that do not dissolve com-
pletely in water. Otherwise, the per-
formance of the system may deteri-
orate over time.
The salt compartment fills with wa-
ter when you switch on the dish-
washer. Therefore, fill the salt com-
partment before starting the dish-
washer.
1. Initially remove the lower basket to
load softening salt.
2. Open the salt compartment lid by turn-
ing it anti-clockwise (A).
3. Only add 1 litre of water to the salt
compartment when using your dish-
washer for the first time.
Bekijk gratis de handleiding van BEKO BDIN25440, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIN25440 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5726 MB |
