BEKO BDIN16440 handleiding
Handleiding
Je bekijkt pagina 37 van 44
EN / 37
8.4 Cleaning the propellers
Clean the impellers at least once a week to
ensure efficient operation of the machine.
Lower propeller
Check if the lower impeller (1) holes are
clogged. If there is a blockage, remove the
impeller and clean it. You can remove the
lower impeller by pulling it upwards (de-
pending on the model)
Check if the holes of the impeller assembly
are clogged. If there is a blockage, remove
the impeller assembly and clean it. (De-
pending on the model)
To remove and clean the lower propeller
group, hold it with one hand from the points
(C) shown in the figure and pull it upwards.
After cleaning, reattach the propeller group
by following the same steps in reverse. (De-
pending on the model)
Do not attempt to turn the propeller
by holding the ends. Trying to turn it
by the ends may cause the gear
system inside the propeller to
break.
To remove and clean the lower propeller
group, hold it with one hand from the points
(C) shown in the figure and pull it upwards.
After cleaning, reattach the propeller group
by following the same steps in reverse. (De-
pending on the model)
Upper propeller
Check if the upper impeller (1) holes are
clogged. If there is a blockage, remove the
impeller and clean it. You can remove the
upper impeller by turning its nut to the left.
Bekijk gratis de handleiding van BEKO BDIN16440, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIN16440 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5301 MB |
