BEKO BDIN16440 handleiding
Handleiding
Je bekijkt pagina 16 van 44
EN / 16
Setting the water softening system
Washing efficiency will be improved when
the water softening system is set correctly.
Read the section on adjusting the water
softening system first.
Regeneration of the water softening sys-
tem can take place in all cycles during the
drying step. When regeneration is per-
formed, the duration of the cycle, energy
and water consumption are increased. For
the regeneration process, the table below
shows the frequency of the regeneration
process, maximum additional time, water
and energy consumption depending on the
water consumption for the Eco 50 °C cycle
when the dishwasher is operated under
standard conditions with a water supply of
14 dH.
Eco 50 °C
water consumption (l)
renew after .... cycle Additional time (min)
Additional water con-
sumption (l)
Additional energy
consumption (kWh)
12.3-14.7 5 5 3.0 0.05
9.6-12.2 6 5 3.0 0.05
9.0-9.5 7 5 3.0 0.05
8.0-9.0 8 5 3.0 0.05
7.0-7.9 9 5 3.0 0.05
For water consumption in the Eco 50 °C
cycle of your dishwasher, refer to the Cycle
Information and Average Consumption Val-
ues Table given in the Cycle Table.
6.3 Setting the Water Softening
System
Setting the water softening system cor-
rectly will improve your dishwasher’s wash-
ing, rinsing, and drying performance.
NOTICE! To set the system, first find out
your water hardness level from the au-
thorised service in your region and set it
as follows.
1.After turning on your dishwasher, press
and hold the Delay and Start Wait Cancel
buttons respectively.
2. Turn LEDs 9 and 3 on by using the delay
key.
3. You may set the water hardness level
with the function keys.
4. Save by pressing On / Off key.
Hardness Level
English Hardness
°dE
German Hardness
°dH
French Hardness
°dF
Water Hardness Level Indicator
0. Level
0-5 0-4 0-8
The 1st Program LED illuminates
at Level 0.
1. Level
6-9 5-7 9-13
The 1st Program LED illuminates
at Level 1.
2. Level
10-15 8-12 14-22
The 2nd Program LED illuminates
at Level 2.
3. Level
16-19 13-15 23-27
The 3rd Program LED illuminates
at Level 3.
4. Level
20-24 16-19 28-34
The 4th Program LED illuminates
at Level 4.
5. Level
25-62 20-50 35-90
At Level 5, Program LED 1,2,3,4 il-
luminates.
Table1: Water Hardness Level Setting
Table
Bekijk gratis de handleiding van BEKO BDIN16440, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDIN16440 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5301 MB |
