BEKO BDFS16031W handleiding
Handleiding
Je bekijkt pagina 37 van 52
EN / 37
7.4 Programming Washing Time
Suspension
If an economical electricity tariff is applied
in your area, you can use the delay function
to wash your dishes during the relevant
hours.
Press the delay button for 1 second
longer than the other buttons.
You can delay the start time of your selec-
ted program up to 9 hours.
1. After selecting the washing program and
other additional functions, press the delay
button.
2. When you press the snooze button, the
“3 hours” snooze indicator will start flash-
ing on the screen.
3. Press the snooze button to set the de-
sired time. Each time you press the button,
the time increases in 3-hour increments up
to 9 hours.
4. After you have set the delay time, close
the door of your machine. The program will
start automatically when the delay time is
over.
If the door is closed after the delay
function is selected, the delay will
start working.
If the door is opened while the
delay function is active, the count-
down will be stopped and the start
icon will start flashing.
Changing the settings while the snooze
function is active
While the delay function is active, you can-
not make changes to the washing pro-
gramme, additional functions or the delay
time.
Auxiliary functions cannot be set
after the program has started.
To cancel the snooze function
To cancel the delay function while it is act-
ive, the programme must be cancelled.
The delay function cannot be set
after the program has started.
7.5 Starting the Cycle
Press the Start / Hold / Cancel key to start
your dishwasher after selecting the cycle
and additional functions.
Dishwasher softens the water as
per the hardness of the mains wa-
ter. The washing period may differ
due to the water softening process.
Moreover, program period may also
change while the program is being
executed as a result of the room
temperature, mains water temper-
ature and the amount of dishes.
Care to avoid opening of the door
while the dishwasher is being oper-
ated. If you need to open the door,
stop the dishwasher by pressing
the Start / Hold / Cancel key. Then
open the door of the dishwasher.
Be careful as steam may come out
when you open the dishwasher’s
door. Press the Start / Hold / Can-
cel key again after closing the dish-
washer door. Cycle shall be re-
sumed.
After rinsing, the dishwasher will be
quiet for a while in pause mode
then will proceed to the drying step
to drain all the water left on the
dishes and inside the dishwasher
and to clean the water softener.
7.6 Cancelling the Cycle
1.Press the Start / Hold / Cancel key for 3
seconds to cancel the cycle.
2.Release the key when the Program indic-
ator starts flashing. The dishwasher will ex-
ecute the necessary operations for a few
minutes to cancel the program.
Bekijk gratis de handleiding van BEKO BDFS16031W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFS16031W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6429 MB |
