BEKO BDFS16030W handleiding
Handleiding
Je bekijkt pagina 43 van 52
EN / 43
• The dishwasher door may be open. >>>
Make sure that the dishwasher door is
closed.
• "On/Off button" may not have been
pressed. >>> Make sure to switch on the
dishwasher by pressing the "On/Off but-
ton".
Dishes are not cleanly washed
• Dishes are placed irregularly. >>> Place
the dishes as specified in the user
manual.
• The proper cycle is not selected. >>> Se-
lect a cycle with a higher temperature
and washing for a longer time.
• Dishes are very dirty >>> Remove the
coarse dirt of your dishes with a napkin
and then place them into your dish-
washer.
• Spray arms are stuck. >>> Before starting
the cycle, make sure that the upper and
lower spray arms rotate freely by rotating
them with your hand.
• The holes of the spray arms are clogged.
>>> Upper or lower holes of the spray
arms may be clogged with food residues
such as lemon seeds. Clean the spray
arms regularly as shown in the Section
"Cleaning and maintenance."
• Filters are clogged. >>> Check whether
the filter system is cleaned. Clean the fil-
ter system regularly as shown in the
"Cleaning and maintenance" section.
• Filters are not installed correctly. >>> In-
spect the filter system and make sure
that it is installed correctly.
• Baskets are overloaded. >>> Do not load
baskets above their capacity.
• Detergent is stored under improper con-
ditions. >>> If you are using a powder de-
tergent, do not store the detergent pack-
age in humid environments. If possible,
store the detergent in a storage container
with a lid. We recommend you to use tab-
let detergent for easy storage.
• Adequate amount of detergent is not ad-
ded. >>> If you are using a powder deter-
gent, put the amount of detergent suit-
able for the soil level of your dishes and
for the definitions of the cycles. We re-
commend using tablet detergents to
achieve the best results.
• Insufficient amount of rinse aid. >>> In-
spect the low rinse aid warning indicator
and add rinse aid, if required. If adequate
amount of rinse aid is available in the
dishwasher, increase the setting for rinse
aid.
• Detergent compartment cover is not
closed. >>> Always close the cover of the
detergent compartment after adding de-
tergent.
Dishes are not dried
• Dishes are placed irregularly. >>> Place
your dishes so that water shall not collect
inside them during washing.
• Insufficient amount of rinse aid. >>> In-
spect the low rinse aid warning indicator
and add rinse aid, if required. If adequate
amount of rinse aid is available in the
dishwasher, increase the setting for rinse
aid.
• Machine is unloaded right after the end
of washing cycle. >>> Do not unload your
dishwasher right after the end of washing
cycle. Keep the door ajar and let the
steam come out for some time and un-
load the dishwasher when the dishes are
cooled so that they are OK to be contac-
ted by hand. Start the unloading opera-
tion from the lower basket. Thus, the wa-
ter remaining on any dish on the upper
basket is prevented from dripping on the
dishes on the lower basket.
• The proper cycle is not selected. >>> Dry-
ing performance is low as the rinsing
temperature is also low in short cycles.
For a higher drying performance, select
longer cycles.
• Tablet detergent is used, and tablet but-
ton is not pressed >>> If your dishwasher
has a "tablet detergent" function, activate
it while using multi-purpose detergents.
• Surface quality of the kitchenware is
poor. >>> You may achieve the expected
washing performance on kitchenware
with damaged surfaces, and the use of
such kitchenware is not correct in terms
Bekijk gratis de handleiding van BEKO BDFS16030W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFS16030W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6224 MB |
